- Mechanical Alloying and Milling
-
C. Suryanarayana, In-Seop An
-
J Korean Powder Metall Inst. 2006;13(5):371-372.
-
DOI: https://doi.org/10.4150/KPMI.2006.13.5.371
-
-
287
View
-
15
Download
-
11
Citations
-
 PDF
-
Citations
Citations to this article as recorded by  - Lemon extract supported green synthesis of bimetallic CuO/Ag nanoporous materials for sensitive detection of vitamin D3
Gowhar A. Naikoo, Fay M. Almashali, Fatima A. S. Habis, Mustri Bano, Jahangir Ahmad Rather, Israr U. Hassan, Rayees Ahmad Sheikh, Palanisamy Kannan, Iman M. Alfagih, Murtaza M. Tambuwala
Scientific Reports.2023;[Epub] CrossRef - Mechanochemical Synthesis of PZT Powders and the Effects of Mechanical Activation on Solid-State Sintering Kinetics
Bijesh Mehta, C. Sasikumar
Transactions of the Indian Institute of Metals.2023; 76(3): 849. CrossRef - Effect of Process Control Agent on Microstructures and High-Temperature Oxidation Behavior of a Nickel-Based ODS Alloy
Zhe Mao, Jing Li, Shi Liu, Liangyin Xiong
Metals.2022; 12(6): 1029. CrossRef - Synthesis of Fe–Al Intermetallic by Mechanical Alloying Process
Vivek Kumar Jain, Manoj Kumar Yadav, Arshad Noor Siddiquee, Zahid Akhtar Khan, Chaitanya Sharma
Journal of The Institution of Engineers (India): Series D.2022; 103(2): 621. CrossRef - Approaches on Ferrofluid Synthesis and Applications: Current Status and Future Perspectives
Oscar Oehlsen, Sussy I. Cervantes-Ramírez, Pabel Cervantes-Avilés, Illya A. Medina-Velo
ACS Omega.2022; 7(4): 3134. CrossRef - Polymorphism of the Co–Te nanophases in mechanochemical synthesis
Marcelo Augusto Malagutti, Vagner Zeizer Carvalho Paes, Julian Geshev, Carlos Eduardo Maduro de Campos
RSC Advances.2022; 12(52): 33488. CrossRef - The effect of milling time on the alumina phase transformation in the AMCs powder metallurgy reinforced by silica-sand-tailings
Sukanto, Wahyono Suprapto, Rudy Soenoko, Yudy Surya Irawan
EUREKA: Physics and Engineering.2022; (1): 103. CrossRef - Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route
J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez
Journal of Materials Research.2021; 36(6): 1328. CrossRef - Effect of the route and sintering time in the microstructure of pure aluminum prepared by high energy ball milling
José Mendoza, C. Carreño-Gallardo, I. Estrada-Guel, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodriguez, G. Rodríguez-Cabriales, J.C Guía-Tello, R. Martínez-Sánchez
Microscopy and Microanalysis.2021; 27(S1): 3294. CrossRef - Optimization of friction stir processing parameters for enhanced microhardness of AA5083/Al-Fe in-situ composites via Taguchi technique
Vivek Kumar Jain, Manoj Kumar Yadav, Arshad Noor Siddiquee, Zahid A. Khan
Material Science, Engineering and Applications.2021; 1(2): 55. CrossRef - Carbide Nanoparticle Dispersion Techniques for Metal Powder Metallurgy
Bahrum Prang Rocky, Christopher R. Weinberger, Steven R. Daniewicz, Gregory B. Thompson
Metals.2021; 11(6): 871. CrossRef
- Nanocrystalline Materials-an Overview
-
C. Suryanarayana
-
J Korean Powder Metall Inst. 1996;3(4):233-245.
-
-
-
 Abstract
PDF
- Nanocrystalline materials, with a grain size of typically <100 nm, are a new class of materials with properties vastly different from and often superior to those of the conventional coarse-grained materials. These materials can be synthesized by a number of different techniques and the grain size, morphology, and composition can be controlled by controlling the process parameters. In comparison to the coarse-grained materials, nanocrystalline materials show higher strength and hardness, enhanced diffusivity, improved ductility/toughness, reduced, density, reduced elastic modulus, higher electrical resistivity, increased specific heat, higher coefficient of thermal expansion, lower thermal conductivity, and superior soft and hard magnetic properties. Limited quantities of these materials are presently produced and marketed in the US, Canada, and elsewhere. Applications for these materials are being actively explored. The present article discusses the synthesis, structure, thermal stability, properties, and potential application of nanocrystalline materials.
|
kpmi
