- Consolidation and Mechanical Behavior of Gas Atomized MgZn4.3Y0.7 Alloy Powders using High Pressure Torsion
-
Eun-Yoo Yoon, Hong-Jun Chae, Taek-Soo Kim, Chong-Soo Lee, Hyoung-Seop Kim
-
J Korean Powder Metall Inst. 2010;17(3):190-196.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.3.190
-
-
157
View
-
0
Download
-
4
Citations
-
 Abstract
 PDF
- In this paper, rapid solidified Mg-4.3Zn-0.7Y (at.%) alloy powders were prepared using an inert gas atomizer, followed by a severe plastic deformation technique of high pressure torsion (HPT) for consolidation of the powders. The gas atomized powders were almost spherical in shape, and grain size was as fine as less than 5;µm due to rapid solidification. Plastic deformation responses during HPT were simulated using the finite element method, which shows in good agreement with the analytical solutions of a strain expression in torsion. Varying the HPT processing temperature from ambient to 473 K, the behavior of powder consolidation, matrix microstructural evolution and mechanical properties of the compacts was investigated. The gas atomized powders were deformed plastically as well as fully densified, resulting in effective grain size refinements and enhanced microhardness values.
-
Citations
Citations to this article as recorded by  - Trend in Research of Powder Consolidation Using Severe Plastic Deformation
Eun Yoo Yoon, Dong Jun Lee, Dong-Hyun Ahn, Hyuk Jae Jeong, Hyoung Seop Kim
Journal of Korean Powder Metallurgy Institute.2013; 20(2): 148. CrossRef - Densification of Copper Powders using High-pressure Torsion Process
Dong-Jun Lee, Eun-Yoo Yoon, Soo-Young Kang, Jung-Hwan Lee, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2012; 19(5): 333. CrossRef - Ultrafine Grained Cu-diamond Composites using High Pressure Torsion
Eun-Yoo Yoon, Dong-Jun Lee, Taek-Soo Kim, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2012; 19(3): 204. CrossRef - Densification and Nanocrystallization of Water-Atomized Pure Iron Powder Using High Pressure Torsion
Eun-Yoo Yoon, Dong-Jun Lee, Ha-Neul Kim, Hee-Soo Kang, Eon-Sik Lee, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2011; 18(5): 411. CrossRef
- Microstructure and Mechanical Behavior of Ultrafine Grained Bulk Al Processed by High Pressure Torsion of the Al Powders
-
Soo-Hyun Joo, Seung-Chae Yoon, Chong-Soo Lee, Hyong-Seop Kim
-
J Korean Powder Metall Inst. 2010;17(1):52-58.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.1.052
-
-
173
View
-
0
Download
-
3
Citations
-
Abstract
PDF
- Bulk nanostructured metallic materials are generally synthesized by bottom-up processing which starts from powders for assembling bulk materials. In this study, the bottom-up powder metallurgy and High Pressure Torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. After the HPT process at 473K, the disk samples reached a steady state condition when the microstructure and properties no longer evolve, and equilibrium boundaries with high angle grain boundaries (HAGBs) were dominant. The well dispersed alumina particles played important role of obstacles to dislocation glide and to grain growth, and thus, reduced the grain size at elevated temperature. The small grain size with HAGBs resulted in high strength and good ductility.
-
Citations
Citations to this article as recorded by - Ultrafine Grained Cu-diamond Composites using High Pressure Torsion
Eun-Yoo Yoon, Dong-Jun Lee, Taek-Soo Kim, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2012; 19(3): 204. CrossRef - Densification of Copper Powders using High-pressure Torsion Process
Dong-Jun Lee, Eun-Yoo Yoon, Soo-Young Kang, Jung-Hwan Lee, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2012; 19(5): 333. CrossRef - Densification and Nanocrystallization of Water-Atomized Pure Iron Powder Using High Pressure Torsion
Eun-Yoo Yoon, Dong-Jun Lee, Ha-Neul Kim, Hee-Soo Kang, Eon-Sik Lee, Hyoung-Seop Kim
Journal of Korean Powder Metallurgy Institute.2011; 18(5): 411. CrossRef
|
kpmi
