- Fabrication of Fe coated Mg Based Desulfurization Powder by Mechanical Alloying Process
-
Joon-Woo Song, Otaduy Guillermo, Byong-Sun Chun, Soon-Jik Hong
-
J Korean Powder Metall Inst. 2012;19(3):226-231.
-
DOI: https://doi.org/10.4150/KPMI.2012.19.3.226
-
-
 Abstract
 PDF
- In this research, the coating behavior of Mg and Fe desulfurization powder fabricated by low energy and conventional planetary mill equipment was investigated as a function of milling time, which produces uniform Fe coated powders due to milling energy. Since high energy ball milling results in breaking the Fe coated Mg powders into coarse particles, low energy ball milling was considered appropriate for this study, and can be implemented in desulfurization industry widely. XRD and FE-SEM analyses were carried out to investigate the microstructure and distribution of the coating material. The thickness of the Fe coating layer reaches a maximum of 14 µm at 20 milling hours. The BCC structures of Fe particles are deformed due to the slip system of Fe coated Mg particles.
- Industrial Supply Chain Trend of Domestic Tungsten
-
Joon-Woo Song, Sang-Hyun Lee, Hyun-Seon Hong, Hong-Yoon Kang, Soon-Jik Hong
-
J Korean Powder Metall Inst. 2012;19(1):79-86.
-
DOI: https://doi.org/10.4150/KPMI.2012.19.1.079
-
-
213
View
-
7
Download
-
3
Citations
-
PDF
-
Citations
Citations to this article as recorded by  - Extraction Factor Of Tungsten Sources From Tungsten Scraps By Zinc Decomposition Process
J.-H. Pee, G.H. Kim, H.Y. Lee, Y.J. Kim
Archives of Metallurgy and Materials.2015; 60(2): 1311. CrossRef - Microstructure and Elevated Temperature Strength of W-ZrC Composites with Micrometric and Nanosized ZrC Particles
Yoon Soo Han, Sung-Soo Ryu
Journal of Korean Powder Metallurgy Institute.2014; 21(6): 415. CrossRef - Investigation of Material Flow and Industrial Trend of Domestic Europium
Han-Jin Ko, Jeong-Gon Kim, Il-Seuk Lee, Hong-Yoon Kang, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2013; 20(5): 382. CrossRef
- Refinement Behavior of Coarse Magnesium Powder by High Energy Ball Milling (HEBM)
-
Joon-Woo Song, Hyo-Seob Kim, Hong-Moule Kim, Taek-Soo Kim, Soon-Jik Hong
-
J Korean Powder Metall Inst. 2010;17(4):302-311.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.4.302
-
-
199
View
-
0
Download
-
4
Citations
-
Abstract
PDF
- In this research, the refinement behavior of the coarse magnesium powders fabricated by gas atomization was investigated as a function of milling time using a short duration high-energy ball milling equipment, which produces fine powders by means of an ultra high-energy within a short duration. The microstructure, hardness, and formability of the powders were investigated as a function of milling time using X-ray diffraction, scanning electron microscopy, Vickers micro-hardness tester and magnetic pulsed compaction. The particle morphology of Mg powders changed from spherical particles of feed metals to irregular oval particles, then platetype particles, with increasing milling time. Due to having HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, resulting in producing plate-type powders. With increasing milling time, the particle size increased until 5 minutes, then decreased gradually reaching a uniform size of about 50 micrometer after 20 minutes. The relative density of the initial power was 98% before milling, and mechanically milled powder was 92~94% with increase milling time (1~5 min) then it increased to 99% after milling for 20 minutes because of the change in particle shapes.
-
Citations
Citations to this article as recorded by - Quantitative Study on the Refinement Behaviors of TiC Powders Produced by Mechanical Milling Under Different Impact Energy
Sung-Mo Hong, Eun-Kwang Park, Kyeong-Yeol Kim, Jin-Ju Park, Min-Ku Lee, Chang-Kyu Rhee, Jin-Kyu Lee, Young-Soon Kwon
Journal of Korean Powder Metallurgy Institute.2012; 19(1): 32. CrossRef - Fabrication of Fe coated Mg Based Desulfurization Powder by Mechanical Alloying Process
Joon-Woo Song, Otaduy Guillermo, Byong-Sun Chun, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2012; 19(3): 226. CrossRef - Characteristics of Indium Dissolution of Waste LCD Panel Powders Fabricated by High Energy Ball Milling (HEBM) Process with Milling Time
Hyo-Seob Kim, Jun-Je Sung, Cheol-Hee Lee, Hyun-Seon Hong, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2011; 18(4): 378. CrossRef - Microstructure and Mechanical Properties of Nano-sized Ti-35%Nb-7%Zr-10%CPP Composite Fabricated by Pulse Current Activated Sintering
Kee-Do Woo, Duck-Soo Kang, Sang-Hyuk Kim, Sang-Hoon Park, Ji-Young Kim, Hye-Rim Ko
Journal of Korean Powder Metallurgy Institute.2011; 18(2): 188. CrossRef
- Effect of Initial Silicon Scrap Size on Powder Refining Process During High Energy Ball Milling (HEBM)
-
Joon-Woo Song, Hyo-Seob Kim, Sung-Shin Kim, Jar-Myung Koo, Soon-Jik Hong
-
J Korean Powder Metall Inst. 2010;17(3):242-250.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.3.242
-
-
186
View
-
1
Download
-
5
Citations
-
Abstract
PDF
- In this research, the optimal manufacturing conditions of fine Si powders from Si scrap were investigated as a function of different initial powder size using the high-energy ball milling equipment, which produces the fine powder by means of an ultra high-energy within a short duration. The morphological change of the powders according to the milling time was observed by Scanning electron microscopy (SEM). With the increasing milling time, the size of Si powder was decreased. In addition, more energy and stress for milling were required with the decreasing initial powder size. The refinement of Si scrap was rapidly carried out at 10min ball milling time. However, the refined powder started to agglomerate at 30 min milling time, while the powder size became uniform at 60 min milling time.
-
Citations
Citations to this article as recorded by - Mechanical Properties and Biocompatibility of Ti-Nb-Zr-Mo-CPP Biomaterial Fabricated by Spark Plasma Sintering
기도 우, 상미 김, 동건 김, 대영 김, 동수 강
Korean Journal of Materials Research.2013; 23(2): 135~142. CrossRef - The Effect of Milling Conditions for Dissolution Efficiency of Valuable Metals from PDP Waste Panels
Hyo-Seob Kim, Chan-Mi Kim, Chul-Hee Lee, Sung-Kyu Lee, Hyun-Seon Hong, Jar-Myung Koo, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2013; 20(2): 107. CrossRef - Microstructure and Mechanical Properties of Nano-sized Ti-35%Nb-7%Zr-10%CPP Composite Fabricated by Pulse Current Activated Sintering
Kee-Do Woo, Duck-Soo Kang, Sang-Hyuk Kim, Sang-Hoon Park, Ji-Young Kim, Hye-Rim Ko
Journal of Korean Powder Metallurgy Institute.2011; 18(2): 188. CrossRef - Effect of Milling Time on the Microstructure and Phase Transformation Behaviors of Ni-B Powder During Mechanical Alloying Process
Jung-Geun Kim, Wook-Jin Lee, Sung-Kyun Park, Ik-Min Park, Yong-Ho Park
Journal of Korean Powder Metallurgy Institute.2011; 18(6): 496. CrossRef - Refinement Behavior of Coarse Magnesium Powder by High Energy Ball Milling (HEBM)
Joon-Woo Song, Hyo-Seob Kim, Hong-Moule Kim, Taek-Soo Kim, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2010; 17(4): 302. CrossRef
|
kpmi
