- Synthesis of Gold Nanoparticles by Chemical Reduction Method for Direct Ink Writing
-
Young-Sang Cho, Soo-Jung Son, Young-Kuk Kim, Kook-Chae Chung, Chul-Jin Choi
-
J Korean Powder Metall Inst. 2010;17(5):390-398.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.5.390
-
-
128
View
-
3
Download
-
4
Citations
-
 Abstract
 PDF
- Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.
-
Citations
Citations to this article as recorded by  - Fabrication Of Colloidal Clusters Decorated With Dye Molecules For Potential Application As Photonic Molecules
Y.-S. Cho
Archives of Metallurgy and Materials.2015; 60(2): 1221. CrossRef - Synthesis of Nickel and Copper Nanopowders by Plasma Arc Evaporation
Young-Sang Cho, Jong Woo Moon, Kook Chae Chung, Jung-Goo Lee
Journal of Korean Powder Metallurgy Institute.2013; 20(6): 411. CrossRef - Low Temperature Debinding Process Using Oxygen Plasma for Flexible Printed Electronics
Young-In Lee
Journal of Korean Powder Metallurgy Institute.2012; 19(5): 343. CrossRef - Fabrication of Fecralloy Foil Coated by Fecralloy Nanoparticles Using Electrospray Processing
Jung-Yeul Yun, Sang-Sun Yang, Hye-Young Koo, Hye-Moon Lee
Journal of Korean Powder Metallurgy Institute.2011; 18(6): 526. CrossRef
- A study on Magnetic Properties of BaFe12O19 Fabricated by Ultrasonic Spray-pyrolysis Process Using Self-Assembly Method
-
Moon-Hee Choi, Ji-Hun Yu, Dong-Hwan Kim, Kook-Chae Chung, Yang-Do Kim
-
J Korean Powder Metall Inst. 2010;17(4):263-269.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.4.263
-
-
220
View
-
0
Download
-
1
Citations
-
Abstract
PDF
- Hexagonal barium ferrite (BaFe_12O_19) nano-particles have been successfully fabricated by spraypylorysis process. BaFe_12O_19 precursor solutions were synthesized by self-assembly method. Diethyleneamine (DEA) surfactant was used to fabricate the micelle structure of Ba-DEA complex under various DEA concentrations. BaFe_12O_19 powders were synthesized with addition of Fe ions to Ba-DEA complex and then fabricated BaFe_12O_19 powders by spray-pyrolysis process at the temperature range of 800sim1000°C. The molar ratio of Ba/DEA and heat-treatment temperatures significantly affected the magnetic properties and morphology of BaFe_12O_19 powders. BaFe_12O_19 powders synthesized with Ba/DEA molar ratio of 1 and heat-treated at 900°C showed the coercive forces (iHc) of 4.2 kOe with average crystal size of about 100 nm.
-
Citations
Citations to this article as recorded by - Synthesize of Nd2Fe14B Powders from 1-D Nd2Fe14B Wires using Electrospinning Process
Nu Si A Eom, Su Noh, Muhammad Aneeq Haq, Bum Sung Kim
Journal of Korean Powder Metallurgy Institute.2019; 26(6): 477. CrossRef
|
kpmi
