- Fabrication and Characterization of ODS 316L Stainless Steels
-
Min-Ho Kim, Ho-Jin Ryu, Sung-Soo Kim, Chang-Hee Han, Jin-Sung Jang, Oh-Jong Kwon
-
J Korean Powder Metall Inst. 2009;16(2):122-130.
-
DOI: https://doi.org/10.4150/KPMI.2009.16.2.122
-
-
171
View
-
0
Download
-
2
Citations
-
 Abstract
 PDF
- Austenitic oxide-dispersion-strengthened (ODS) stainless steel was fabricated using a wet mixing process without a mechanical milling in order to reduce contaminations of impurities during their fabrication process. Solution of yttrium nitrate was dried after a wet mixing with 316L stainless steel powder. Carbon and oxygen contents were effectively reduced by this wet processing. Microstructural analysis showed that coarse yttrium silicates of about 150 nm were formed in austenitic ODS steels with a silicon content of about 0.8 wt%. Wet-processed austenitic ODS steel without silicon showed higher yield strength by the presence of finer oxide of about 20 nm.
-
Citations
Citations to this article as recorded by  - Dispersion Behaviors of Y2O3Particles Into Aisi 316L Stainless Steel by Using Laser Cladding Technology
Eun-Kwang Park, Sung-Mo Hong, Jin-Ju Park, Min-Ku Lee, Chang-Kyu Rhee, Kyeong-Won Seol, Yang-Kyu Lee
Journal of Korean Powder Metallurgy Institute.2013; 20(4): 269. CrossRef - Effects of the Sintering Variable on Impact Energy in MA 316L ODS and Wet 316L ODS Stainless Steels
Sung-Soo Kim, Chang-Hee Han, Jin-Sung Jang
Journal of Korean Powder Metallurgy Institute.2010; 17(2): 113. CrossRef
|
kpmi
