- [English]
- Fabrication of Fe-TiB2 Composite Powder by High-Energy Milling and Subsequent Reaction Synthesis
-
H.X. Khoa, N.Q. Tuan, Y.H. Lee, B.H. Lee, N.H. Viet, J.S. Kim
-
J Korean Powder Metall Inst. 2013;20(3):221-227.
-
DOI: https://doi.org/10.4150/KPMI.2013.20.3.221
-
-
306
View
-
1
Download
-
10
Citations
-
 Abstract
 PDF
- TiB_2-reinforced iron matrix composite (Fe-TiB_2) powder was in-situ fabricated from titanium hydride (TiH_2) and iron boride (FeB) powders by the mechanical activation and a subsequent reaction. Phase formation of the composite powder was identified by X-ray diffraction (XRD). The morphology and phase composition were observed and measured by field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The results showed that TiB_2 particles formed in nanoscale were uniformly distributed in Fe matrix. Fe_2B phase existed due to an incomplete reaction of Ti and FeB. Effect of milling process and synthesis temperature on the formation of composite were discussed.
-
Citations
Citations to this article as recorded by  - Low temperature controllable synthesis of transition metal and rare earth borides mediated by molten salt
Xueyin Liu, Quanli Jia, Shaowei Zhang, William E. Lee
International Materials Reviews.2024; 69(2): 107. CrossRef - TiB2-Fe hard alloys obtained using SHS powders of the Ti-B-Fe system
O.K. Lepakova, O.A. Shkoda
International Journal of Refractory Metals and Hard Materials.2024; 125: 106915. CrossRef - In Situ Spark Plasma Sintering, Microstructure and Mechanical Properties of Fe-15Cr-2Mn-1.5Al Matrix Composites Reinforced with TiB2 and CrFeB
Jian Liu, Min Wu, Bin Wang, Wei Xu, Weiping Chen, Fangfang Liu
JOM.2023; 75(3): 886. CrossRef - Glass-Forming Ability and Magnetic Properties of Al82Fe16Ce2 and Al82Fe14Mn2Ce2 Alloys Prepared by Mechanical Alloying
Nguyen Hong Hai, Nguyen Hoang Viet, Nguyen Thi Hoang Oanh
Applied Sciences.2023; 14(1): 152. CrossRef - Powder metallurgy processed TiB2-reinforced steel matrix composites: a review
Silani Sahoo, Bharat Bhushan Jha, Animesh Mandal
Materials Science and Technology.2021; 37(14): 1153. CrossRef - Synthesis of Cu-based TiCx composites via in-situ reaction between CuxTi melt and dissolvable solid carbon
Lei Guo, Yang Yang, Xiaochun Wen, Han Gao, Zhe Wang, Zhancheng Guo
Powder Technology.2020; 362: 375. CrossRef - Microstructure and Electrical Property of Ex-Situ and In-Situ Copper Titanium Carbide Nanocomposites
Nguyen Hoang Viet, Nguyen Thi Hoang Oanh
Metals.2020; 10(6): 735. CrossRef - Mechanical and Wear Behaviour of Hot-Pressed 304 stainless Steel Matrix Composites Containing TiB2 Particles
Silani Sahoo, Bharat B. Jha, Tarasankar Mahata, Jyothi Sharma, Tammana S. R. Ch. Murthy, Animesh Mandal
Transactions of the Indian Institute of Metals.2019; 72(5): 1153. CrossRef - Effect of volume fraction of reinforcement phase on mechanical behavior of ultra-high-temperature composite consisting of iron matrix and TiB2 particulates
Babak Jahani, Mehdi Salimi Jazi, Fardad Azarmi, Andrew Croll
Journal of Composite Materials.2018; 52(5): 609. CrossRef - Impression creep behaviour of TiB2 particles reinforced steel matrix composites
S. Sahoo, B. B. Jha, T.S. Mahata, J. Sharma, T. S. R. Ch. Murthy, A. Mandal
Materials Science and Technology.2018; 34(16): 1965. CrossRef
|
kpmi
