- Effect of Powder Characteristic and Freeze Condition on the Pore Characteristics of Porous W
-
Na-Yeon Kwon, Sung-Tag Oh
-
J Korean Powder Metall Inst. 2012;19(4):259-263.
-
DOI: https://doi.org/10.4150/KPMI.2012.19.4.259
-
-
225
View
-
1
Download
-
12
Citations
-
 Abstract
 PDF
- Dependence of the freeze-drying process condition on microstructure of porous W and pore formation mechanism were studied. Camphene slurries with WO_3 contents of 10 vol% were prepared by milling at 50°C with a small amount of dispersant. Freezing of a slurry was done in Teflon cylinder attached to a copper bottom plate cooled at -25°C. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at 800°C for 30 min, and sintered in the furnace at 900°C for 1 h. After heat treatment in hydrogen atmosphere, WO_3 powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about 70µm which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores with dendritic structure due to the growth of camphene dendrite depending on the degree of nucleation and powder rearrangement in the slurry.
-
Citations
Citations to this article as recorded by  - Fabrication of Porous TiO2 with Aligned Pores Using Tert-Butyl Alcohol Based Freeze Casting
Eui Seon Lee, Sung-Tag Oh
Korean Journal of Metals and Materials.2024; 62(12): 929. CrossRef - Fabrication of Porous W-Ti by Freeze-Drying and Hydrogen Reduction of WO3-TiH2 Powder Mixtures
Hyunji Kang, Sung Hyun Park, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2017; 24(6): 472. CrossRef - Synthesis of Aligned Porous Sn by Freeze-Drying of Tin Chloride/camphene Slurry
수룡 방, 승탁 오
Korean Journal of Materials Research.2015; 25(1): 27~31. CrossRef - Effect of Sublimable Vehicle Compositions in the Camphor-NaphthaleneSystem on the Pore Structure of Porous Cu-Ni
Na-Yeon Kwon, Myung-Jin Suk, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2015; 22(5): 362. CrossRef - Porous Mo–30wt.% W alloys synthesized from camphene/MoO3–WO3 slurry by freeze drying and sintering process
Ki Cheol Jeon, Beom Seok Kim, Young Do Kim, Myung-Jin Suk, Sung-Tag Oh
International Journal of Refractory Metals and Hard Materials.2015; 53: 32. CrossRef - Fabrication of Porous Cu-Ni by Freeze Drying and Hydrogen Reduction of CuO-NiO Powder Mixture
Han Gil Seo, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2014; 21(1): 34. CrossRef - Synthesis of porous Cu–Sn using freeze-drying process of CuO–SnO2/camphene slurries
Sung-Tag Oh, Wonsuk Lee, Si Young Chang, Myung-Jin Suk
Research on Chemical Intermediates.2014; 40(7): 2495. CrossRef - Fabrication of Porous Cu by Freeze-drying Process of Camphene Slurry with CuO-coated Cu Powders
Su-Ryong Bang, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2014; 21(3): 191. CrossRef - Effect of Solidification Condition of Sublimable Vehicles on the Pore Characteristics in Freeze Drying Process
Myung-Jin Suk, Ji Soon Kim, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2014; 21(5): 366. CrossRef - Freeze Drying for Porous Mo with Sublimable Vehicles of Eutectic System
Gyu-Tae Lee, Han Gil Seo, Myung-Jin Suk, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2013; 20(4): 253. CrossRef - Synthesis of Porous Cu-Sn by Freeze Drying and Hydrogen Reduction Treatment of Metal Oxide Composite Powders
Min-Sung Kim, Ho-Suk Yoo, Sung-Tag Oh, Chang-Yong Hyun
Korean Journal of Materials Research.2013; 23(12): 722. CrossRef - Fabrication of Porous Mo by Freeze-Drying and Hydrogen Reduction of MoO3/Camphene Slurry
Wonsuk Lee, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2012; 19(6): 446. CrossRef
|
kpmi
