- Wear Behaviors of Gas Atomized and Extruded Hypereutectic Al-Si Alloys
-
Hyeong-Ho Jin, Ki-Young Nam, Yong-Jin Kim, Yong-Ho Park, Seog-Young Yoon
-
J Korean Powder Metall Inst. 2006;13(4):250-255.
-
DOI: https://doi.org/10.4150/KPMI.2006.13.4.250
-
-
 Abstract
 PDF
- Wear behaviors of gas atomized and extruded Al-Si alloys were investigated using the dry sliding wear apparatus. The wear tests were conducted on Al-Si alloy discs against cast iron pins and vice versa at constant load of 10N with different sliding speed of 0.1, 0.3, 0.5m/s. In the case of Al-Si alloy discs slid against the cast iron pins, the wear rate slightly increased with increasing the sliding speed due to the abrasive wear occurred between Al-Si alloy discs and cast iron pins. Conversely, in the case of cast iron discs against Al-Si alloy pins, the wear rate decreased with increasing the sliding speed up to 0.3m/s. However, the wear rate increased with increasing the sliding speed from 0.3m/s to 0.5m/s. It could be due to adhesive wear behavior and abrasive wear behavior_between cast iron discs and Al-Si alloy pins.
|
kpmi
