- Sintering Behavior of 7xxx Series Al Blended Powder with Variation of Heating Rate
-
Shin Kang, Kyung Min, Hyun Park, Si-Young Chang, Young Kim
-
J Korean Powder Metall Inst. 2005;12(2):131-135.
-
DOI: https://doi.org/10.4150/KPMI.2005.12.2.131
-
-
158
View
-
2
Download
-
1
Citations
-
 Abstract
 PDF
- 7xxx series Al alloy has the most attractive properties including its excellent high specific strength, stress corrosion cracking and corrosion-resistance. However, in case of the Al-Zn system, the liquid phase has a transient aspect because of the high solid solubility of Zn in Al. Therefore, transient liquid phase sintering behavior was observed during the sintering process. And the amount of liquid and its duration were influenced by the process variables including heating rate and final sintering temperature. At high heating rates(100°C/min), the liquid fraction increased during sintering because diffusion was minimized and therefore local saturation could easily occur. The sintered density increased with increasing heating rate.
-
Citations
Citations to this article as recorded by  - Mechanical properties of sintered 7xxx series AI/SiCp composites
Kyung Ho Min, Baek-Hee Lee, Si-Young Chang, Young Do Kim
Materials Letters.2007; 61(11-12): 2544. CrossRef
|
kpmi
