In this study, a process is developed for 3D printing with alumina (Al₂O₃). First, a photocurable slurry made from nanoparticle Al₂O₃ powder is mixed with hexanediol diacrylate binder and phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide photoinitiator. The optimum solid content of Al₂O₃ is determined by measuring the rheological properties of the slurry. Then, green bodies of Al₂O₃ with different photoinitiator contents and UV exposure times are fabricated with a digital light processing (DLP) 3D printer. The dimensional accuracy of the printed Al₂O₃ green bodies and the number of defects are evaluated by carefully measuring the samples and imaging them with a scanning electron microscope. The optimum photoinitiator content and exposure time are 0.5 wt% and 0.8 s, respectively. These results show that Al₂O₃ products of various sizes and shapes can be fabricated by DLP 3D printing.