Skip Navigation
Skip to contents

Journal of Powder Materials : Journal of Powder Materials

OPEN ACCESS
SEARCH
Search

Author index

Page Path
HOME > Browse Articles > Author index
Search
Sung Gye Park 1 Article
Article image
Spark Plasma Sintering of Fe-Ni-Cu-Mo-C Low Alloy Steel Powder
Hong-Hai Nguyen, Minh-Thuyet Nguyen, Won Joo Kim, Ho Yoon Kim, Sung Gye Park, Jin-Chun Kim
J Korean Powder Metall Inst. 2016;23(3):207-212.   Published online June 1, 2016
DOI: https://doi.org/10.4150/KPMI.2016.23.3.207
  • 230 View
  • 3 Download
  • 4 Citations
AbstractAbstract PDF

In this study, Fe-Cu-Ni-Mo-C low alloy steel powder is consolidated by spark plasma sintering (SPS) process. The internal structure and the surface fracture behavior are studied using field-emission scanning electron microscopy and optical microscopy techniques. The bulk samples are polished and etched in order to observe the internal structure. The sample sintered at 900°C with holding time of 10 minutes achieves nearly full density of 98.9% while the density of the as-received conventionally sintered product is 90.3%. The fracture microstructures indicate that the sample prepared at 900°C by the SPS process is hard to break out because of the presence of both grain boundaries and internal particle fractures. Moreover, the lamellar pearlite structure is also observed in this sample. The samples sintered at 1000 and 1100°C exhibit a large number of tiny particles and pores due to the melting of Cu and aggregation of the alloy elements during the SPS process. The highest hardness value of 296.52 HV is observed for the sample sintered at 900°C with holding time of 10 minutes.

Citations

Citations to this article as recorded by  
  • Fabrication of Fe-Si-B Based Amorphous Powder Cores by Spark Plasma Sintered and Their Magnetic Properties
    Liang Yan, Biao Yan, Yin Jian
    Materials.2022; 15(4): 1603.     CrossRef
  • Effect of Milling Time and Addition of PCA on Austenite Stability of Fe-7%Mn Alloy
    Seung-Jin Oh, In-Jin Shon, Seok-Jae Lee
    Journal of Korean Powder Metallurgy Institute.2018; 25(2): 126.     CrossRef
  • Sintering and Microstructures of SUS 316L Powder Produced by 3D Printing Process
    W.J. Kim, H.-H. Nguyen, H.Y. Kim, M.-T. Nguyen, H.S. Park, J.-C. Kim
    Archives of Metallurgy and Materials.2017; 62(2): 1215.     CrossRef
  • Fabrication and Mechanical Property of Fe-20Cu-1C Compacts by SPS process with Different Heating Rate
    Jung-Han Ryu, Soo-Sik Shin, Byung-Rok Ryu, Kyung-Sik Kim, Jun-Ho Jang, Ik-Hyun Oh, Kap-Tae Kim, Hyun-Kuk Park
    Journal of Korean Powder Metallurgy Institute.2017; 24(4): 302.     CrossRef

Journal of Powder Materials : Journal of Powder Materials
TOP