- Sliding Wear and Friction Behavior of Electro-Pressure Sintered Co-Fe and Co-Ni Compacts
-
Yong Kwon, Tai-Woung Kim, Yong-Suk Kim
-
J Korean Powder Metall Inst. 2004;11(6):451-461.
-
DOI: https://doi.org/10.4150/KPMI.2004.11.6.451
-
-
 Abstract
 PDF
- Dry sliding wear behavior of electro-pressure sintered Co-Fe and Co-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered Co-Fe, Co-Ni disks against alumina (Al_2O_3) and silica (SiO_2) balls at various loads ranging from 3N to 12N. A constant sliding speed of 0.1m/sec was employed. Wear rate was calculated by dividing the weight loss of a specimen by the measured specific gravity and sliding dis-tance. Worn surfaces and cross-sections of the specimens were examined using an SEM and EDS to investigate wear mechanism of the compacts. The wear behavior of the compacts were discussed as a function of their com-position. Effects of mechancial properties of the compact as well as oxide layers formed on wearing surface on the wear were also discussed.
|
kpmi
