This study is a basic research for repair material production which manufactured a Cu repair coating layer on the base material of a Cu plate using kinetic spray process. Furthermore, the manufactured material underwent an annealing heat treatment, and the changes of microstructure and macroscopic properties in the Cu repair coating layer and base material were examined. The powder feedstocks were sphere-shaped pure Cu powders with an average size of 27.7 μm. The produced repair coating material featured 600 μm thickness and 0.8% porosity, and it had an identical α-Cu single phase as the early powder. The produced Cu repair coating material and base material displayed extremely high adhesion characteristics that produced a boundary difficult to identify. Composition analysis confirmed that the impurities in the base material and repair coating material had no significant differences. Microstructure observation after a 500°C/1hr. heat treatment (vacuum condition) identified recovery, recrystallization and grain growth in the repair coating material and featured a more homogeneous microstructure. The hardness difference (ΔH_v) between the repair coating material and base material significantly reduced from 87 to 34 after undergoing heat treatment.

Citations

Citations to this article as recorded by  

• Manufacturing of Large-Scale Cold-Sprayed Ta Target Material and Its Sputtering Property
  Gi-Su Ham, Dong-Yeol Wi, Jun-Mo Yang, Kee-Ahn Lee
  Journal of Thermal Spray Technology.2019; 28(8): 1974.     CrossRef
• High-temperature thermo-mechanical behavior of functionally graded materials produced by plasma sprayed coating: Experimental and modeling results
  Kang Hyun Choi, Hyun-Su Kim, Chang Hyun Park, Gon-Ho Kim, Kyoung Ho Baik, Sung Ho Lee, Taehyung Kim, Hyoung Seop Kim
  Metals and Materials International.2016; 22(5): 817.     CrossRef
• Fabrication and Microstructure/Properties of Bulk-typeTantalum Material by a Kinetic Spray Process
  Ji-Hye Lee, Ji-Won Kim, Kee-Ahn Lee
  Journal of Korean Powder Metallurgy Institute.2016; 23(1): 8.     CrossRef
• Effect of Heat Treatment Environment on the Microstructure and Properties of Kinetic Sprayed Tantalum Coating Layer
  Ji-Hye Lee, Hyung-Jun Kim, Kee-Ahn Lee
  Journal of Korean Powder Metallurgy Institute.2015; 22(1): 32.     CrossRef