Bulk graphite is manufactured using graphite scrap as the filler and phenolic resin as the binder. Graphite scrap, which is the by-product of processing the final graphite product, is pulverized and sieved by particle size. The relationship between the density and porosity is analyzed by measuring the mechanical properties of bulk graphite. The filler materials are sieved into mean particle sizes of 10.62, 23.38, 54.09, 84.29, and 126.64 μm. The bulk graphite density using the filler powder with a particle size of 54.09 μm is 1.38 g/cm³, which is the highest value in this study. The compressive strength tends to increase as the bulk graphite density increases. The highest compressive strength of 43.14 MPa is achieved with the 54.09 μm powder. The highest flexural strength of 23.08 MPa is achieved using the 10.62 μm powder, having the smallest average particle size. The compressive strength is affected by the density of bulk graphite, and the flexural strength is affected by the filler particle size of bulk graphite.

Citations

Citations to this article as recorded by  

• Effect of Microstructural Change under Pressure during Isostatic Pressing on Mechanical and Electrical Properties of Isotropic Carbon Blocks
  Tae-Sub Byun, Sang-Hye Lee, Suk-Hwan Kim, Jae-Seung Roh
  Materials.2024; 17(2): 387.     CrossRef
• Feasibility assessment of manufacturing carbonized blocks from rice husk charcoal
  Young-Min Hwang, Jae-Seung Roh, Gibeop Nam
  Biomass Conversion and Biorefinery.2024; 14(20): 26409.     CrossRef
• Improving the packing and mechanical properties of graphite blocks by controlling filler particle-size distribution
  Hye in Hwang, Ji Hong Kim, Ji Sun Im
  Advanced Composite Materials.2024; 33(5): 762.     CrossRef
• Effect of Impregnation and Graphitization on EDM Performance of Graphite Blocks Using Recycled Graphite Scrap
  Sang-Hye Lee, Dong-Pyo Jeon, Hyun-Yong Lee, Dong-Gu Lee, Jae-Seung Roh
  Processes.2023; 11(12): 3368.     CrossRef
• Ultrafine Graphite Scrap and Carbon Blocks Prepared by High-Solid-Loading Bead Milling and Conventional Ball Milling: A Comparative Assessment
  Chonradee Amnatsin, Waroot Kanlayakan, Siraprapa Lhosupasirirat, Nattarut Verojpipath, Boonsueb Pragobjinda, Tanakorn Osotchan, Chakrit Sirisinha, Toemsak Srikhirin
  ACS Omega.2023; 8(50): 47919.     CrossRef
• The Effect of the Heating Rate during Carbonization on the Porosity, Strength, and Electrical Resistivity of Graphite Blocks Using Phenolic Resin as a Binder
  Sang-Hye Lee, Jae-Hyun Kim, Woo-Seok Kim, Jae-Seung Roh
  Materials.2022; 15(9): 3259.     CrossRef
• Rheological Behaviour of Hard-Metal Carbide Powder Suspensions at High Shear Rates
  B. Hausnerová, P. Sáha, J. Kubát, T. Kitano, J. Becker
  Journal of Polymer Engineering.2000;[Epub]     CrossRef