Overview and Future Concerns for Lithium-Ion Batteries Materials

Hang-Chul Jung; Geon-Hong Kim; Hyun-Seon Hong; Dong-Wan Kim

doi:10.4150/KPMI.2010.17.3.175

Articles

Page Path: HOME > J Korean Powder Metall Inst > Volume 17(3); 2010 > Article

리튬이온이차전지 소재의 산업동향 및 기술전망: 정항철, 김건홍, 홍현선, 김동완
Overview and Future Concerns for Lithium-Ion Batteries Materials: Hang-Chul Jung, Geon-Hong Kim, Hyun-Seon Hong, Dong-Wan Kim; Journal of Korean Powder Metallurgy Institute 2010;17(3):175-189
DOI: https://doi.org/10.4150/KPMI.2010.17.3.175

¹고등기술연구원 플랜트엔지니어링센터
²고등기술연구원 플랜트엔지니어링센터
³고등기술연구원 플랜트엔지니어링센터
⁴아주대학교 재료공학과
¹Plant Engineering Center, Institute for Advanced Engineering (IAE)
²Plant Engineering Center, Institute for Advanced Engineering (IAE)
³Plant Engineering Center, Institute for Advanced Engineering (IAE)
⁴Department of Materials Science & Engineering, Ajou University

275 Views
8 Download
13 Crossref
0 Scopus

Full Article

Download PDF

Figure & Data

References

Citations

Citations to this article as recorded by

Recovery of Barium, Nickel, and Titanium Powders from Waste MLCC
Haein Shin, Kun-Jae Lee
Journal of Powder Materials.2024; 31(5): 374. CrossRef
Fabrication of Nanowire by Electrospinning Process Using Nickel Oxide Particle Recovered from MLCC
Haein Shin, Jongwon Bae, Minsu Kang, Kun-Jae Lee
journal of Korean Powder Metallurgy Institute.2023; 30(6): 502. CrossRef
Changes in Electrical Properties of Copper-Plated Layer by Organic Additives on High Current Density
Tae-Gyu Woo, Il-Song Park
Korean Journal of Metals and Materials.2020; 58(1): 41. CrossRef
A Study on the Recovery of Li2CO3 from Cathode Active Material NCM(LiNiCoMnO2) of Spent Lithium Ion Batteries
Jei-Pil Wang, Jae-Jung Pyo, Se-Ho Ahn, Dong-Hyeon Choi, Byeong-Woo Lee, Dong-Won Lee
Journal of Korean Powder Metallurgy Institute.2018; 25(4): 296. CrossRef
Effect of Gelatin and Chloride Ions on the Mechanical Properties and Microstructural Evolution of Copper Foil
Tae-Gyu Woo, Man-Hyung Lee, Kyeong-Won Seol
Korean Journal of Metals and Materials.2018; 56(7): 518. CrossRef
Main Effects of Plating Parameters on Mechanical and Surface Properties of Electroplated Copper
Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol
Korean Journal of Metals and Materials.2018; 56(6): 459. CrossRef
Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps
Hyun Seon Hong, Dae Weon Kim, Hee Lack Choi, Sung-Soo Ryu
Archives of Metallurgy and Materials.2017; 62(2): 1011. CrossRef
The effect of additives and current density on mechanical properties of cathode metal for secondary battery
Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol
Electronic Materials Letters.2013; 9(4): 535. CrossRef
Recovery of Lithium and Leaching Behavior of NCM Powder by Carbon Reductive Treatment from Li(NCM)O2System Secondary Battery Scraps
Dae Weon Kim, Seong Tae Jang
Journal of the Korean Institute of Resources Recycling.2013; 22(4): 62. CrossRef
Recovery of Lithium and Leaching Behavior of NCM Powder by Hydrogen Reductive Treatment from NCM System Li-ion Battery Scraps
Dae Weon Kim, Seong Tae Jang, Kyung Min Baek
Journal of the Korean Institute of Resources Recycling.2013; 22(3): 43. CrossRef
Industrial Supply Chain Trend of Domestic Tungsten
Joon-Woo Song, Sang-Hyun Lee, Hyun-Seon Hong, Hong-Yoon Kang, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2012; 19(1): 79. CrossRef
Research and Development Status of Low-Cost Fe-based Cathode Materials for Lithium Secondary Batteries
Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Hang-Chul Jung, Geon-Hong Kim
Journal of Korean Powder Metallurgy Institute.2011; 18(2): 196. CrossRef
Preparation of the Nano Cobalt Powder by Wet Chemical Reduction Method
Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Geon-Hong Kim, Hang-Chul Jung
Journal of Korean Powder Metallurgy Institute.2011; 18(3): 244. CrossRef

Cited

Related articles