kpmi
Articles
- Page Path
- HOME > J Korean Powder Metall Inst > Volume 17(1); 2010 > Article
-
- Effect of Process-Control Agents on Characteristics of Amorphous Al-Y-Ni-Co Alloy Powder Produced by Mechanical Alloying
- H.V. Nguyen, J.C. Kim, J.S. Kim, Y.J. Kwon, Y.S. Kwon
-
Journal of Korean Powder Metallurgy Institute 2010;17(1):7-12
DOI: https://doi.org/10.4150/KPMI.2010.17.1.007
1Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
2Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
3Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
4Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
5Research Center for Machine Parts and Materials Process
2Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
3Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
4Research Center for Machine Parts and Materials Processing, School of Materials Science and Engineering, University of Ulsan
5Research Center for Machine Parts and Materials Process
- 76 Views
- 0 Download
- 0 Crossref
- 0 Scopus
Abstract
In this work, effect of various process-control agents (PCAs) on the mechanical alloying of amorphous alloy of Al_85Y_8Ni_5Co_2 has been investigated. The dependence of the particle shape, size and crystallization behavior of the amorphous alloy powders on the type of PCAs and their concentrations was investigated by using X-ray diffraction, field-emission scanning electron microscopy and differential scanning calorimetry. It was found that the additive of toluene could affect positively the amorphization and thermally induced crystallization processes, as well as the size refinement, morphology and particle-size distribution of as-milled powders in comparison with alloy obtained without PCA.
CitedTOP
