kpmi
Articles
- Page Path
- HOME > J Korean Powder Metall Inst > Volume 16(3); 2009 > Article
- 유체 내 전기선폭발법에 의한 은 나노입자 유체의 제조 및 특성
- 박은주, 박은주, 김지순, 권영순, 김진천, 최혜선, 정용훈
- Production and Properties of Ag Metallic Nanoparticle Fluid by Electrical Explosion of Wire in Liquid
- E.J. Park, L.H. Bac, J.S. Kim, Y.S. Kwon, J.C. Kim, H.S. Choi, Y.H. Chung
-
Journal of Korean Powder Metallurgy Institute 2009;16(3):217-222
DOI: https://doi.org/10.4150/KPMI.2009.16.3.217
2울산대학교 첨단소재공학부
3울산대학교 첨단소재공학부
4울산대학교 첨단소재공학부
5울산대학교 첨단소재공학부
6울산대학교 생명과학부
7(주)솔고나노어드밴스
1School of Materials Science & Engineering, University of Ulsan
2School of Materials Science & Engineering, University of Ulsan
3School of Materials Science & Engineering, University of Ulsan
4School of Materials Science & Engineering, University of Ulsan
5School of Materials Science & Engineering, University of Ulsan
6School of Biological Sciences, University of Ulsan
7SolcoNanoadvance Inc.
- 182 Views
- 0 Download
- 7 Crossref
- 0 Scopus
Abstract
This paper presents a novel single-step method to prepare the Ag nanometallic particle dispersed fluid (nanofluid) by electrical explosion of wire in liquid, deionized water (DI water). X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and transmission electron microscope (TEM) were used to investigate the characteristics of the Ag nanofluids. Zeta potential was also used to measure the dispersion properties of the as-prepared Ag nanofluid. Pure Ag phase was detected in the nanofluids using water. FE-SEM analysis shows that the size of the particles formed in DI water was about 88 nm and Zeta potential value was about -43.68 without any physical and chemical treatments. Thermal conductivity of the as-prepared Ag particle dispersed nanofluid shows much higher value than that of pure DI water.
Cited- Related articles
-
TOP
