- Comparison of Machinability Between PCD Tool and SCD Tool for Large Area Mirror Surface Machining Using Multi-tool by Planer
-
Chang-Eui Kim, Hwan-Jin Choi, Eun-Chae Jeon, Tae-Jin Je, Myung-Chang Kang
-
J Korean Powder Metall Inst. 2013;20(4):297-301.
-
DOI: https://doi.org/10.4150/KPMI.2013.20.4.297
-
-
121
View
-
0
Download
-
2
Citations
-
 Abstract
 PDF
- Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experiments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.
-
Citations
Citations to this article as recorded by  - Machining Characteristics of Micro Structure using Single-Crystal Diamond Tool on Cu-plated Mold
Chang-Eui Kim, Eun-chae Jeon, Tae-Jin Je, Myung Chang Kang
Journal of Korean Powder Metallurgy Institute.2015; 22(3): 169. CrossRef - Analysis Of Drilling Of A Metal Plate With Pilot Hole
K.S. Kim
Archives of Metallurgy and Materials.2015; 60(2): 1307. CrossRef
|
kpmi
