kpmi
Articles
- Page Path
- HOME > J Powder Mater > Volume 20(4); 2013 > Article
- 평삭공정에서 경면가공을 위한 단결정 및 다결정 다이아몬드 다중공구의 가공성 평가
- 김창의, 최환진, 전은채, 제태진, 강명창
- Comparison of Machinability Between PCD Tool and SCD Tool for Large Area Mirror Surface Machining Using Multi-tool by Planer
- Chang-Eui Kim, Hwan-Jin Choi, Eun-Chae Jeon, Tae-Jin Je, Myung-Chang Kang
-
Journal of Powder Materials 2013;20(4):297-301
DOI: https://doi.org/10.4150/KPMI.2013.20.4.297
1부산대학교 하이브리드소재 솔루션 국가핵심연구센터
2한국기계연구원 나노공정연구실
3한국기계연구원 나노공정연구실
4한국기계연구원 나노공정연구실
5부산대학교 하이브리드소재 솔루션 국가핵심연구센터
1National Core Research Center for Hybrid Materials Solution, Pusan National University
2Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
3Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
4Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
5National Core Research Center for Hybrid Materials Solution, Pusan National University
2한국기계연구원 나노공정연구실
3한국기계연구원 나노공정연구실
4한국기계연구원 나노공정연구실
5부산대학교 하이브리드소재 솔루션 국가핵심연구센터
1National Core Research Center for Hybrid Materials Solution, Pusan National University
2Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
3Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
4Nano Machining Lab., KIMM (Korea Institute of Machinery & Materials)
5National Core Research Center for Hybrid Materials Solution, Pusan National University
- 16 Views
- 0 Download
- 2 Crossref
- 0 Scopus
Abstract
Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experiments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.
Cited- Related articles
-
