Citations

Citations to this article as recorded by  

• Recovery of Barium, Nickel, and Titanium Powders from Waste MLCC
  Haein Shin, Kun-Jae Lee
  Journal of Powder Materials.2024; 31(5): 374.     CrossRef
• Fabrication of Nanowire by Electrospinning Process Using Nickel Oxide Particle Recovered from MLCC
  Haein Shin, Jongwon Bae, Minsu Kang, Kun-Jae Lee
  journal of Korean Powder Metallurgy Institute.2023; 30(6): 502.     CrossRef
• Changes in Electrical Properties of Copper-Plated Layer by Organic Additives on High Current Density
  Tae-Gyu Woo, Il-Song Park
  Korean Journal of Metals and Materials.2020; 58(1): 41.     CrossRef
• A Study on the Recovery of Li₂CO₃ from Cathode Active Material NCM(LiNiCoMnO₂) of Spent Lithium Ion Batteries
  Jei-Pil Wang, Jae-Jung Pyo, Se-Ho Ahn, Dong-Hyeon Choi, Byeong-Woo Lee, Dong-Won Lee
  Journal of Korean Powder Metallurgy Institute.2018; 25(4): 296.     CrossRef
• Effect of Gelatin and Chloride Ions on the Mechanical Properties and Microstructural Evolution of Copper Foil
  Tae-Gyu Woo, Man-Hyung Lee, Kyeong-Won Seol
  Korean Journal of Metals and Materials.2018; 56(7): 518.     CrossRef
• Main Effects of Plating Parameters on Mechanical and Surface Properties of Electroplated Copper
  Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol
  Korean Journal of Metals and Materials.2018; 56(6): 459.     CrossRef
• Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps
  Hyun Seon Hong, Dae Weon Kim, Hee Lack Choi, Sung-Soo Ryu
  Archives of Metallurgy and Materials.2017; 62(2): 1011.     CrossRef
• The effect of additives and current density on mechanical properties of cathode metal for secondary battery
  Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol
  Electronic Materials Letters.2013; 9(4): 535.     CrossRef
• Recovery of Lithium and Leaching Behavior of NCM Powder by Carbon Reductive Treatment from Li(NCM)O2System Secondary Battery Scraps
  Dae Weon Kim, Seong Tae Jang
  Journal of the Korean Institute of Resources Recycling.2013; 22(4): 62.     CrossRef
• Recovery of Lithium and Leaching Behavior of NCM Powder by Hydrogen Reductive Treatment from NCM System Li-ion Battery Scraps
  Dae Weon Kim, Seong Tae Jang, Kyung Min Baek
  Journal of the Korean Institute of Resources Recycling.2013; 22(3): 43.     CrossRef
• Industrial Supply Chain Trend of Domestic Tungsten
  Joon-Woo Song, Sang-Hyun Lee, Hyun-Seon Hong, Hong-Yoon Kang, Soon-Jik Hong
  Journal of Korean Powder Metallurgy Institute.2012; 19(1): 79.     CrossRef
• Research and Development Status of Low-Cost Fe-based Cathode Materials for Lithium Secondary Batteries
  Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Hang-Chul Jung, Geon-Hong Kim
  Journal of Korean Powder Metallurgy Institute.2011; 18(2): 196.     CrossRef
• Preparation of the Nano Cobalt Powder by Wet Chemical Reduction Method
  Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Geon-Hong Kim, Hang-Chul Jung
  Journal of Korean Powder Metallurgy Institute.2011; 18(3): 244.     CrossRef