Nanopowders provide better details for micro features and surface finish in powder injection molding processes. However, the small size of such powders induces processing challenges, such as low solid loading, high feedstock viscosity, difficulty in debinding, and distinctive sintering behavior. Therefore, the optimization of process conditions for nanopowder injection molding is essential, and it should be carefully performed. In this study, the powder injection molding process for Fe nanopowder has been optimized. The feedstock has been formulated using commercially available Fe nanopowder and a wax-based binder system. The optimal solid loading has been determined from the critical solid loading, measured by a torque rheometer. The homogeneously mixed feedstock is injected as a cylindrical green body, and solvent and thermal debinding conditions are determined by observing the weight change of the sample. The influence of the sintering temperature and holding time on the density has also been investigated. Thereafter, the Vickers hardness and grain size of the sintered samples have been measured to optimize the sintering conditions.

Citations

Citations to this article as recorded by  

• Investigation of stainless steel 316L/zirconia joint part fabricated by powder injection molding
  Chang Woo Gal, Sang Soo Han, Jun Sae Han, Dongguo Lin, Seong Jin Park
  International Journal of Applied Ceramic Technology.2019; 16(1): 315.     CrossRef
• Fabrication and properties of Si3N4 based ceramics using combustion synthesized powders
  Chang Woo Gal, Gi Woung Song, Woon Hyung Baek, Hyung Kyu Kim, Dae Keun Lee, Ki Wook Lim, Seong Jin Park
  International Journal of Refractory Metals and Hard Materials.2019; 81: 325.     CrossRef
• Powder Injection Molding Process in Industrial Fields
  Joo Won OH, Chang Woo GAL, Daseul SHIN, Jae Man PARK, Woo Seok YANG, Seong Jin PARK
  Journal of the Japan Society of Powder and Powder Metallurgy.2018; 65(9): 539.     CrossRef