kpmi
Articles
- Page Path
- HOME > J Korean Powder Metall Inst > Volume 15(6); 2008 > Article
- 치밀화된 Ti(C,N)과 TiC-TiN-Ni 써멧에서의 Ti(C,N) 고용상의 특성평가
- 김성원, 채정민, 강신후, 류성수, 김형태
- Characterization of Ti(C,N) Solid Solutions in Densified Ti(C,N) and TiC-TiN-Ni Cermet
- Seong-Won Kim, Jung-Min Chae, Shin-Hoo Kang, Sung-Soo Ryu, Hyung-Tae Kim
-
Journal of Korean Powder Metallurgy Institute 2008;15(6):503-508
DOI: https://doi.org/10.4150/KPMI.2008.15.6.503
1요업기술원 구조세라믹부
2요업기술원 구조세라믹부
3서울대학교 재료공학부
4요업기술원 구조세라믹부
5요업기술원 구조세라믹부
1Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
2Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
3Department of Materials Science and Engineering, Seoul National University
4Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
5Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
2요업기술원 구조세라믹부
3서울대학교 재료공학부
4요업기술원 구조세라믹부
5요업기술원 구조세라믹부
1Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
2Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
3Department of Materials Science and Engineering, Seoul National University
4Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
5Advanced Engineering Ceramics Department, Korea Institute of Ceramic Engineering and Technology
- 14 Views
- 0 Download
- 0 Crossref
- 0 Scopus
Abstract
Ti(C,N) solid solutions in hot-pressed Ti(C_xN_1-x) (x=0.0, 0.3, 0.5, 0.7, 1.0) and 40TiC-40TiN-20Ni (in wt.%) cermet were characterized in this study. For hot-pressed Ti(C,N)s, the lattice parameters and hardness values of Ti(C,N) were determined by using XRD (X-Ray Diffraction) and nanoindentation. The properties of hot-pressed Ti(C,N) samples changed linearly with their carbon or nitrogen contents. For the TiC-TiN-Ni cermet, the hardness of the hard phase and binder phase were determined by nanoindentation in conjunction with microstructural observation. The measured hardness values were sim8.7 GPa for the binder phase and sim28.7 GPa for the hard phase, which was close to the hardness of hot-pressed Ti(C_0.7N_0.3).
Cited- Related articles
-
