Oxidation Behavior of WC-Co Hardmetal

doi:10.4150/KPMI.2004.11.2.111

Articles

Page Path: HOME > J Korean Powder Metall Inst > Volume 11(2); 2004 > Article

WC-Co 초경합금의 산화거동
Oxidation Behavior of WC-Co Hardmetal: Journal of Korean Powder Metallurgy Institute 2004;11(2):111-117
DOI: https://doi.org/10.4150/KPMI.2004.11.2.111

prev next

196 Views
0 Download
6 Crossref
0 Scopus

Full Article

Download PDF

Abstract

The oxidation behavior of 91 WC-9Co hardmetal in weight percentage has been studied in the present work as a part of the development of recycling process. The morphological and compositional changes of the WC-Co hardmetal with oxidation time at 900°C were analyzed by using surface observation and X-ray diffraction. respective]y. As the oxidation time increased, the WC-Co hardmetal was continuously expanded to form porous oxide mixtures of CoWO_4 and WO_3. The morphology of porous oxide mixture was basically dependent on initial shape of the WC-Co hardmetal. From thermo-gravimetric (TG) analysis, it was found that the oxidation rate was increased with increasing oxidation temperature and oxygen content in the flowing atmospheric gas. The fraction of oxidation versus time curves showed S-curve relationship at a given of oxidation temperature. These oxidation behaviors of the WC-Co hardmetal were discussed in terms of previously proposed kinetic models.

Keywords: Tungsten carbide;Hardmetal;Oxidation;Recycling;

Figure & Data

References

Citations

Citations to this article as recorded by

An Evaluation of WC-Co Tool Tip Scraps Reinforcement in the Hadfield Austenitic Manganese Steel Fabricated In Situ Steel Casting
Muhammad Rizki Gorbyandi Nadi, Gita Novian Hermana, Wiwik Purwadi, Cecep Ruskandi, Darma Firmansyah Undayat, Ari Siswanto
Metallography, Microstructure, and Analysis.2023; 12(5): 802. CrossRef
Fabrication of tungsten oxide powder from WC–Co cemented carbide scraps by oxidation behaviour
Min Soo Park, Jong-Min Gwak, Kyeong-mi Jang, Gook-Hyun Ha
Powder Metallurgy.2023; 66(5): 688. CrossRef
Influence of temperature on the biaxial strength of cemented carbides with different microstructures
E. Chicardi, R. Bermejo, F.J. Gotor, L. Llanes, Y. Torres
International Journal of Refractory Metals and Hard Materials.2018; 71: 82. CrossRef
Recovery of tungsten carbide from hard material sludge by oxidation and carbothermal reduction process
Woo-Gwang Jung
Journal of Industrial and Engineering Chemistry.2014; 20(4): 2384. CrossRef
Thermal oxidation behavior of WC–Co hard metal machining tool tip scraps
Wang-Hoi Gu, Yeon Seok Jeong, Kyeongmi Kim, Jin-Chun Kim, Seong-Ho Son, Sunjung Kim
Journal of Materials Processing Technology.2012; 212(6): 1250. CrossRef
Frictional wear evaluation of WC–Co alloy tool in friction stir spot welding of low carbon steel plates
D.H. Choi, C.Y. Lee, B.W. Ahn, J.H. Choi, Y.M. Yeon, K. Song, H.S. Park, Y.J. Kim, C.D. Yoo, S.B. Jung
International Journal of Refractory Metals and Hard Materials.2009; 27(6): 931. CrossRef

Cited

Related articles