kpmi
Articles
- Page Path
- HOME > J Korean Powder Metall Inst > Volume 16(5); 2009 > Article
- Fe-8 wt%Ni 나노합금분말 사출성형체의 소결특성 및 표면조도
- 차범하, 이재성
- Surface Roughness and Sintering Characteristics of Fe-8 wt%Ni Component Fabricated by PIM
- Berm-Ha Cha, Jai-Sung Lee
-
Journal of Korean Powder Metallurgy Institute 2009;16(5):342-350
DOI: https://doi.org/10.4150/KPMI.2009.16.5.342
1한양대학교 금속재료공학과
2한양대학교 금속재료공학과
1Department of Metallurgy and Materials Science, Hanyang University
2Department of Metallurgy and Materials Science, Hanyang University
2한양대학교 금속재료공학과
1Department of Metallurgy and Materials Science, Hanyang University
2Department of Metallurgy and Materials Science, Hanyang University
- 103 Views
- 0 Download
- 5 Crossref
- 0 Scopus
Citations
Citations to this article as recorded by 
- Opportunity and Challenges of Iron Powders for Metal Injection Molding
Abhijeet Premkumar Moon, Srinivas Dwarapudi, Kameswara Srikar Sista, Deepak Kumar, Gourav Ranjan Sinha
ISIJ International.2021; 61(7): 2015. CrossRef - Densification and microstructural development during sintering of powder injection molded Fe micro–nanopowder
Joon-Phil Choi, Hyun-Gon Lyu, Won-Sik Lee, Jai-Sung Lee
Powder Technology.2014; 253: 596. CrossRef - Consolidation of Hierarchy-Structured Nanopowder Agglomerates and Its Application to Net-Shaping Nanopowder Materials
Jai-Sung Lee, Joon-Phil Choi, Geon-Yong Lee
Materials.2013; 6(9): 4046. CrossRef - Consolidation of Iron Nanopowder by Nanopowder-Agglomerate Sintering at Elevated Temperature
Jai-Sung Lee, Joon-Chul Yun, Joon-Phil Choi, Geon-Yong Lee
Journal of Korean Powder Metallurgy Institute.2013; 20(1): 1. CrossRef - Manufacturing of Micro Gas Bearing by Fe-Ni Nanopowder and Metal Mold Using LIGA
Soo-Jung Son, Young-Sang Cho, Dae-Jung Kim, Jong-Hyun Kim, Suk-Sang Chang, Chul-Jin Choi
Journal of Korean Powder Metallurgy Institute.2012; 19(2): 140. CrossRef
CitedTOP
