Whisker-type magnesium hydroxide sulfate hydrate (5Mg(OH)₂·MgSO₄·3H₂O, abbreviated 513 MHSH), is used in filler and flame-retardant composites based on its hydrate phase and its ability to undergo endothermic dehydration in fire conditions, respectively. In general, the length of whiskers is determined according to various synthetic conditions in a hydrothermal reaction with high temperature (~180°C). In this work, high-quality 513 MHSH whiskers are synthesized by controlling the concentration of the raw material in ambient conditions without high pressure. Particularly, the concentration of the starting material is closely related to the length, width, and purity of MHSH. In addition, a ceramic-coating system is adopted to enhance the mechanical properties and thermal stability of the MHSH whiskers. The physical properties of the silica-coated MHSH are characterized by an abrasion test, thermogravimetric analysis, and transmission electron microscopy.

Citations

Citations to this article as recorded by  

• Effect of sulfate ion on synthesis of 5 Mg(OH)2·MgSO4·3H2O whiskers using non-hydrothermal method with acid catalyst
  Areum Choi, Nuri Oh, YooJin Kim
  Journal of the Korean Ceramic Society.2022; 59(2): 224.     CrossRef
• Study of SiO2 coating and carboxylic surface-modification on Mg-based inorganic fiber by one-step reflux reaction
  Minsol Park, Areum Choi, Seiki Kim, Wooyoung Shim, YooJin Kim
  Journal of the Korean Ceramic Society.2022; 59(6): 869.     CrossRef
• Effect of H₂SO₄ and Reaction Time on Synthesis of 5Mg(OH)₂∙MgSO₄∙3H₂O Whiskers using Hydrothermal Reaction
  Areum Choi, Nuri Oh, YooJin Kim
  Journal of Korean Powder Metallurgy Institute.2020; 27(5): 401.     CrossRef

Silica is used in shell materials to minimize oxidation and aggregation of nanoparticles. Particularly, porous silica has gained attention because of its performance in adsorption, catalysis, and medical applications. In this study, to investigate the effect of the density of the silica coating layer on the color of the pigment, we arbitrarily change the structure of a silica layer using an etchant. We use NaOH or NH₄OH to etch the silica coating layer. First, we synthesize α-FeOOH for a length of 400 nm and coat it with TEOS to fabricate particles with a 50 nm coating layer. The coating thickness is then adjusted to 30–40 nm by etching the silica layer for 5 h. Four different shapes of α-FeOOH with different colors are measured using UV–vis light. From the color changes of the four different shapes of α-FeOOH features during coating or etching, the L^* value is observed to increase and brighten the overall color, and the b^* value increases to impart a clear yellow color to the pigment. The brightest yellow color was that coated with silica; if the sample is etched with NaOH or NH₄OH, the b^* value can be controlled to study the yellow colors.

Citations

Citations to this article as recorded by  

• Trend of Ceramic Nano Pigments
  Ri Yu, YooJin Kim
  Ceramist.2019; 22(3): 256.     CrossRef

Nitrogen-doped titanium dioxide (N-doped TiO₂) is attracting continuously increasing attention as a material for environmental photocatalysis. The N-atoms can occupy both interstitial and substitutional positions in the solid, with some evidence of a preference for interstitial sites. In this study, N-doped TiO₂ is prepared by the sol–gel method using NH₄OH and NH₄Cl as N ion doping agents, and the physical and photocatalytic properties with changes in the synthesis temperature and amount of agent are analyzed. The photocatalytic activities of the N-doped TiO₂ samples are evaluated based on the decomposition of methylene blue (MB) under visible-light irradiation. The addition of 5 wt% NH₄Cl produces the best physical properties. As per the UV-vis analysis results, the N-doped TiO₂ exhibits a higher visible-light activity than the undoped TiO₂. The wavelength of the N-doped TiO₂ shifts to the visible-light region up to 412 nm. In addition, this sample shows MB removal of approximately 81%, with the whiteness increasing to +97 when the synthesis temperature is 600oC. The coloration and phase structure of the N-doped TiO₂ are characterized in detail using UV-vis, CIE Lab color parameter measurements, and powder X-ray diffraction (XRD).

In this work, we synthesize brilliant yellow color α-FeOOH by controlling the rod length and core-shell structure. The characteristics of α-FeOOH nanorods are controlled by the reaction conditions. In particular, the length of the α-FeOOH rods depends on the concentration of the raw materials, such as the alkali solution. The length of the nanorods is adjusted from 68 nm to 1435 nm. Their yellowness gradually increases, with the highest b^* value of 57 based on the International Commission on Illumination (CIE) Lab system, by controlling the nanorod length. A high quality yellow color is obtained after formation of a silica coating on the α-FeOOH structure. The morphology and the coloration of the nal products are investigated in detail by X-ray diffraction, scanning electron microscopy, UV-vis spectroscopy, and the CIE Lab color parameter measurements.

Fe-based pigments have attracted much interest owing to their eco-friendliness. In particular, the color of nanosized pigments can be tuned by controlling their size and morphology. This study reports on the effect of length on the coloration of β-FeOOH pigments prepared using an NH₄OH solution. First, rod-type β-FeOOH is prepared by the hydrolysis of FeCl₃·6H₂O and NH₄OH. When the amount of NH₄OH is increased, the length of the rods decreases. Thus, the length of the nanorods can be adjusted from 10 nm to 300 nm. The color of β-FeOOH changes from orangered to yellow depending on the length of β-FeOOH. The color and phase structure of β-FeOOH is characterized by UVvis spectroscopy, CIE Lab color parameter measurements, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and powder X-ray diffraction (XRD).

This work describes the coloration, chemical stability of SiO₂ and SnO₂-coated blue CoAl₂O₄ pigment. The CoAl₂O₄, raw materials, were synthesized by a co-precipitation method and coated with silica (SiO₂) and tin oxide (SnO₂) using sol-gel method, respectively. To study phase and coloration of CoAl₂O₄, we prepared nano sized CoAl₂O₄ pigments which were coated SiO₂ and SnO₂ using tetraethylorthosilicate, Na₂SiO₃ and Na₂SnO₃ as a coating material. To determine the stability of the coated samples and their colloidal solutions under acidic and basic conditions, colloidal nanoparticle solutions with various pH values were prepared and monitored over time. Blue CoAl₂O₄ solutions were tuned yellow color under all acidic/basic conditions. On the other hand, the chemical stability of SiO₂ and SnO₂-coated CoAl₂O₄ solution were improved when all samples pH values, respectively. Phase stability under acidic/basic condition of the core-shell type CoAl₂O₄ powders were characterized by transmission electron microscope, X-ray diffraction, CIE L*a*b* color parameter measurements.

Citations

Citations to this article as recorded by  

• Coloration and Chemical Stability of SiO2and SnO2Coated Blue CoAl2O4Pigment
  JiYeon Yun, Ri Yu, Jae-Hwan Pee, YooJin Kim
  Journal of Korean Powder Metallurgy Institute.2014; 21(5): 377.     CrossRef

Citations

Citations to this article as recorded by  

• Effect of sulfate ion on synthesis of 5 Mg(OH)2·MgSO4·3H2O whiskers using non-hydrothermal method with acid catalyst
  Areum Choi, Nuri Oh, YooJin Kim
  Journal of the Korean Ceramic Society.2022; 59(2): 224.     CrossRef
• Effect of H₂SO₄ and Reaction Time on Synthesis of 5Mg(OH)₂∙MgSO₄∙3H₂O Whiskers using Hydrothermal Reaction
  Areum Choi, Nuri Oh, YooJin Kim
  Journal of Korean Powder Metallurgy Institute.2020; 27(5): 401.     CrossRef
• Study of Fabrication and Improvement of Mechanical Properties of Mg-based Inorganic Fiber using Reflux Process and Silica Coating
  Ri Yu, YooJin Kim
  Journal of Korean Powder Metallurgy Institute.2019; 26(3): 195.     CrossRef
• Effect of MgSO4/MgO on the Synthesis of 5Mg(OH)2·MgSO4·3H2O Whiskers using One-step Ambient Pressure
  Ri Yu, Jae-Hwan Pee, Hyung Tae Kim, YooJin Kim
  Journal of the Korean Ceramic Society.2013; 50(3): 201.     CrossRef