Fabrication and Properties of Alloy Foam Materials using Metal Powders

James Choi; Ku-Hwan Kim

doi:10.4150/KPMI.2010.17.6.489

Articles

Page Path: HOME > J Korean Powder Metall Inst > Volume 17(6); 2010 > Article

금속 분말을 이용한 합금폼 제조 및 특성: 최내현, 김구환
Fabrication and Properties of Alloy Foam Materials using Metal Powders: James Choi, Ku-Hwan Kim; Journal of Korean Powder Metallurgy Institute 2010;17(6):489-493
DOI: https://doi.org/10.4150/KPMI.2010.17.6.489

¹주식회사 알란텀
²주식회사 알란텀
¹Alantum corp.
²Alantum corp.

prev next

86 Views
0 Download
14 Crossref
0 Scopus

Full Article

Download PDF

Abstract

Nickel-based and iron-based alloys have been developed and commercialized for a wide range of high performance applications at severely corrosive and high temperature environment. This alloy foam has an outstanding performance which is predestinated for diesel particulate filters, heat exchangers, and catalyst support, noise absorbers, battery, fuel cell, and flame distributers in burners in chemical and automotive industry. Production of alloy foam starts from high-tech coating technology and heat treatment of transient liquid-phase sintering in the high temperature. These technology allow for preparation of a wide variety of foam compositions such as Ni, Cr, Al, Fe on various pore size of pure nickel foam or iron foam in order for tailoring material properties to a specific application.

Keywords: Porous material;Metal alloy foam;Base foam;Coated foam;

Figure & Data

References

Citations

Citations to this article as recorded by

Fabrication and High-Temperature Compressive Behavior of Unique Multi-Sheet Stacked Block Ni–Cr–Al Metallic Foam
Kyu-Sik Kim, Tae-Hoon Kang, Man-Ho Park, Kee-Ahn Lee
Metals and Materials International.2021; 27(5): 1138. CrossRef
Fabrication and Mechanical Properties of Open‐Cell Austenitic Stainless Steel Foam by Electrostatic Powder Spraying Process
Tae-Hoon Kang, Kyu-Sik Kim, Jung-Yeul Yun, Min-Jeong Lee, Kee-Ahn Lee
Advanced Engineering Materials.2020;[Epub] CrossRef
Structural Characteristics, Microstructure and Mechanical Properties of Fe-Cr-Al Metallic Foam Fabricated by Powder Alloying Process
Kyu-Sik Kim, Byeong-Hoon Kang, Man-Ho Park, Jung-Yeul Yun, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2020; 27(1): 37. CrossRef
Effect of Strain Rate and Loading Direction on the Mechanical Properties of Ni-Cr-Al Superalloy Foam Fabricated by Powder Alloying Method
Kyu-Sik Kim, Jung-Suk Bae, Jae-Sung Oh, Kee-Ahn Lee
Korean Journal of Metals and Materials.2020; 58(6): 375. CrossRef
Asymmetry in the Mechanical Properties of Block Ni-Cr-Al Superalloy Foam Fabricated by the Combination of Powder Alloying and Hot Rolling Processes
Kyu-Sik Kim, Min-Chul Shim, Man-Ho Park, Jung-Yeul Yun, Kee-Ahn Lee
Korean Journal of Metals and Materials.2020; 58(2): 103. CrossRef
A Study on Pore Properties of SUS316L Powder Porous Metal Fabricated by Electrostatic Powder Coating Process
Min-Jeong Lee, Yu-Jeong Yi, Hyeon-Ju Kim, Manho Park, Byoung-Kee Kim, Jung-Yeul Yun
Journal of Korean Powder Metallurgy Institute.2018; 25(5): 415. CrossRef
Microstructure and Tensile Deformation Behavior of Ni-Cr-Al Powder Porous Block Material
Chul-O Kim, Jung-Suk Bae, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2015; 22(2): 93. CrossRef
High temperature oxidation behavior of Ni-Cr-Al based powder porous metal
Jae-Sung Oh, Min-Chul Shim, Man-Ho Park, Kee-Ahn Lee
Metals and Materials International.2014; 20(5): 915. CrossRef
Effect of Cell Size on the High Temperature Oxidation Properties of Fe-Cr-Al Powder Porous Metal Manufactured by Electro-spray Process
Jae-Sung Oh, Young-Min Kong, Byoung-Kee Kim, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2014; 21(1): 55. CrossRef
Effect of the pore size on the creep deformation behavior of Ni-Fe-Cr-Al porous metal
Kyu-Sik Kim, Jung-Yeol Yun, Baig-Gyu Choi, Kee-Ahn Lee
Metals and Materials International.2014; 20(3): 507. CrossRef
Effect of Pre-Oxidation on the High Temperature Oxidation Behavior of Fe-Cr-Al Powder Porous Metal
Jae Sung Oh, Seon Hui Lim, Sung Hwan Choi, Man Ho Park, Kee Ahn Lee
Advanced Materials Research.2013; 690-693: 294. CrossRef
Effect of Sintering Temperature on the High Temperature Oxidation of Fe-Cr-Al Powder Porous Metal Manufactured by Electrospray Process
Jae-Sung Oh, Young-Min Kong, Byoung-Kee Kim, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2012; 19(6): 435. CrossRef
High Temperature Oxidation Behavior of Ni based Porous Metal
Sung-Hwan Choi, Jung-Yeul Yun, Hye-Mun Lee, Young-Min Kong, Byoung-Kee Kim, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2011; 18(2): 122. CrossRef
Effect of Pore Formers and Sintering Temperatures on Microstructure and Bending Strength of the Porous Zirconia Ceramics
Eun-Jung Lee, In-Hyuck Song, Jang-Hoon Ha, Yoo-Dong Hahn, Yang-Do Kim
Journal of Korean Powder Metallurgy Institute.2011; 18(6): 502. CrossRef

Cited

Related articles